A-Three Dimensional Numerical Simulator For Expansion-Drive Reservoirs

ABSTRACT

Every simulation study is a unique process, starting from the geological model and reservoir description to the final analysis of recovery factor optimizations. In petroleum engineering area, numerical reservoir simulators are often employed to obtained meaningful and reliable solutions for most actual cases due to extreme complexity of reservoir systems. In this work, a three-dimensional numerical reservoir simulator is developed for expansiondrive reservoirs. The governing equation is discretized using finite difference approach; conjugate gradient method with the aid of MATLAB 9.0.0R code is used to solve the system of linear equations to obtain reservoir pressure for each cell, until bubble point pressure is reached; cumulative production at bubble point is computed as sum of expansion from each cell and oil production rate is determined at each time step. The average reservoir pressure is determined as a weighted average based on the stock tank oil that is left in the reservoir, and finally the recovery factor at the bubble point pressure is computed. Contour plots (with colour map to ease the user’s assimilation and interpretation of the simulator results), of reservoir pressure depletion with time were generated for different number of finite-difference grid blocks. The results indicate that the more the number of grid blocks used, the more accurate the numerical solution and the more detailed the description of the reservoir fluid distribution. The plot of average reservoir pressure against time shows a rapid decline in the average reservoir pressure due to the negligible compressibility associated with rock and liquid expansion-drive reservoirs. The estimated oil cumulative production of 236MSTB was recovered in 1180days up to the bubble point using the developed simulator. Furthermore, sensitivity analysis was performed to investigate the impact of key reservoir parameters the average reservoir pressure.