ABSTRACT
After detailed study on machines and levers, the construction work started as follows:-
Making out, pattern development, cutting filling, drilling, machining, assembling, welding and finishing. Detailed procedures carried out is located at the sequence of operation in subsequent pages.
The machine has scale of 1:5 in all parts of its dimensions. However, brief dimensions are given below:-
Upper surface of bowl-850mm
Inner surface of bowl-335mm
Stand height-325mm
Diameter of wheel-250mm
Diameter of shaft seating and the shaft4mm
Thickness of type-75mm
The drawing of the project was done and enclosed at the end page of this booklet. At last, a 150kg capacity of conveying machine was constructed.
TABLE OF CONTENTS
Title pages
Title page
Approval page
Dedication page
Acknowledgment page
Abstract
CHAPTER ONE
Introduction
Historical background
1.2Need for constructing the machine
CHAPTER TWO
THEORY/LITERATURE SURVEY
2.1Types of load to be carried by the conveyor
2.2Operation of the wheel-barrow
CHAPTER THREE
3.1Equipments/tools employed during construction of the wheel-barrow
3.2Materials of construction
3.3Construction procedure
3.4Sequence of operation
3.5Design calculations
3.6Calculations basic on the bowl
3.7Specifications
3.8Project drawing
CHAPTER FOUR
COSTING OF PORTABLE WHEEL-BARROW
4.1Material cost analysis
4.2Labour cost analysis
4.3Miscellaneous costs
Total cost
CHAPTER FIVE
5.1Discussion
5.2Precautions taken during construction
5.3Cautions to users
5.4Recommendations
5.5Conclusions
References