DESIGN AND CONSTRUCTION OF A REFRIGERATOR

ABSTRACT
This write up is a detail of the process and formulation of plan for the physical realization of the construction of a refrigerator. It is divided into chapter, which discussed extensively the practical refrigeration cycle with full attention given to design factors, working principle and choice of material.
The method used in construction, assembly and arriving at knowing the safety requirements were not left out. 


TABLE OF CONTENT 
Title page          
Letter of Transmittal        
Release of Page        
Signature Page        
Approval Page        
Dedication          
Acknowledgement        
List of Symbol        
Table of Content          
Abstract 
         
CHAPTER ONE 
1.0 Introduction         
1.1 Development of Refrigerator     
1.2 Purpose of Construction      
1.3 Importance and Specification of Project   
1.4 Scope and Limitation       
1.5 Statement of the Problem      

CHAPTER TWO 
2.0 Literature Review       
2.1 Refrigeration as Related to Thermodynamics Process  
2.2 Reversed Heat Engine Cycle     
2.3 Replacement of the Expansion Engine by the Throttle Valve 
2.4 Condition at the Compressor inlet     
2.5 Under-cooling of the Condensed Vapor   
2.6 Definition of the Key Terms     

CHAPTER THREE
3.0 Detailed Information Needed for the Construction   
3.1 Safety Consideration       
3.2 Unit Description        
3.3 Practical Refrigeration Cycle     
3.4 Method of Construction and Procedure   
3.5 Fitting of the Evaporator      
3.6 Other Assembly       

CHAPTER FOUR   
4.0 Design Calculation and Analysis    
4.1 Heat Leakages Through the Boundary    
4.2 The Product Load       
4.3 Air Change Load       
4.4 The Determination of Standard Component of Design  
4.5 Determination of Compressor Size    
4.6 The Evaporator Size Capacity      
4.7 The Condenser        
4.8 The Size of the Capillary Tube     
4.9 Piston Displacement       

CHAPTER FIVE 
5.0 Defrosting         
5.1 Analysis and Material Cost Value    
5.2 Recommendation       
5.3 Recommendation for usage of Unit    
5.4 Conclusion         
5.5 Complaints, Causes and Remedies.     
Reference        

Overall Rating

1.00

5 Star
(0)
4 Star
(0)
3 Star
(0)
2 Star
(0)
1 Star
(1)
Out of date and poorly edited

Content is dated from about year 2000. Refers to R-12 refrigerant no longer used in most non-automotive applications. Reads like an undergraduate university thesis by an unknown author. Author is not native English speaker. Many spelling errors which should have been corrected before publication. Not recommended.

Written By: Chris Peachment January 3rd, 2023 0 of 0 people found this useful
Is this review useful?
APA

Research, A. (2018). DESIGN AND CONSTRUCTION OF A REFRIGERATOR. Afribary. Retrieved from https://track.afribary.com/works/design-and-construction-of-a-refrigerator

MLA 8th

Research, Afri "DESIGN AND CONSTRUCTION OF A REFRIGERATOR" Afribary. Afribary, 03 Feb. 2018, https://track.afribary.com/works/design-and-construction-of-a-refrigerator. Accessed 23 Nov. 2024.

MLA7

Research, Afri . "DESIGN AND CONSTRUCTION OF A REFRIGERATOR". Afribary, Afribary, 03 Feb. 2018. Web. 23 Nov. 2024. < https://track.afribary.com/works/design-and-construction-of-a-refrigerator >.

Chicago

Research, Afri . "DESIGN AND CONSTRUCTION OF A REFRIGERATOR" Afribary (2018). Accessed November 23, 2024. https://track.afribary.com/works/design-and-construction-of-a-refrigerator