Isothermal oxidation performance of Laser Cladding Assisted with Preheat (LCAP) tribaloy T-800 composite coatings deposited on EN8

Abstract:

It is anticipated that laser cladding assisted with preheat (LCAP)-deposited Tribaloy (T-800) composite coatings enhances resistance to structural degradation upon exposure to elevated-temperature oxidation service environments. The oxidation kinetics of LCAP T-800 composite coatings deposited on EN8 substrate and its mechanisms have not been explored in severe conditions that are similar to operational parameters. The isothermal oxidation behaviour of the T-800 composite coating deposited on EN8 via LCAP was studied at 800 °C in air for up to 120 h (5 × 24 h cycles) and contrasted to that of uncoated samples. The mass gain per unit area of the coating was eight times less than that of the uncoated EN8 substrate. The parabolic rate constant (Kp) for EN8 was 6.72 × 10−12 g2·cm−4·s−1, whilst that for the T-800 composite coating was 8.1 × 10−13 g2·cm−4·s−1. This was attributed to a stable chromium oxide (Cr2O3) layer that formed on the coating surface, thereby preventing further oxidation, whilst the iron oxide film that formed on the EN8 substrate allowed the permeation of the oxygen ions into the oxide. The iron oxide (Fe2O3) film that developed on EN8 spalled, as evidenced by the cracking of oxide when the oxidation time was greater than 72 h, whilst the Cr2O3 film maintained its integrity up to 120 h. A parabolic law was observed by the T-800 composite coating, whilst a paralinear law was reported for EN8 at 800 °C up to 120 h. This coating can be used in turbine parts where temperatures are

Subscribe to access this work and thousands more

Report

Subscribe & Access

Overall Rating

0

5 Star

(0)

4 Star

(0)

3 Star

(0)

2 Star

(0)

1 Star

(0)

APA

Trinity, N (2024). Isothermal oxidation performance of Laser Cladding Assisted with Preheat (LCAP) tribaloy T-800 composite coatings deposited on EN8. Afribary. Retrieved from https://track.afribary.com/works/isothermal-oxidation-performance-of-laser-cladding-assisted-with-preheat-lcap-tribaloy-t-800-composite-coatings-deposited-on-en8

MLA 8th

Trinity, Nyadongo "Isothermal oxidation performance of Laser Cladding Assisted with Preheat (LCAP) tribaloy T-800 composite coatings deposited on EN8" Afribary. Afribary, 12 Apr. 2024, https://track.afribary.com/works/isothermal-oxidation-performance-of-laser-cladding-assisted-with-preheat-lcap-tribaloy-t-800-composite-coatings-deposited-on-en8. Accessed 06 Nov. 2024.

MLA7

Trinity, Nyadongo . "Isothermal oxidation performance of Laser Cladding Assisted with Preheat (LCAP) tribaloy T-800 composite coatings deposited on EN8". Afribary, Afribary, 12 Apr. 2024. Web. 06 Nov. 2024. < https://track.afribary.com/works/isothermal-oxidation-performance-of-laser-cladding-assisted-with-preheat-lcap-tribaloy-t-800-composite-coatings-deposited-on-en8 >.

Chicago

Trinity, Nyadongo . "Isothermal oxidation performance of Laser Cladding Assisted with Preheat (LCAP) tribaloy T-800 composite coatings deposited on EN8" Afribary (2024). Accessed November 06, 2024. https://track.afribary.com/works/isothermal-oxidation-performance-of-laser-cladding-assisted-with-preheat-lcap-tribaloy-t-800-composite-coatings-deposited-on-en8

Isothermal oxidation performance of Laser Cladding Assisted with Preheat (LCAP) tribaloy T-800 composite coatings deposited on EN8

0

Document Details

Related Works