ABSTRACT
Cavitation is the appearance of vapor cavities inside an initially
homogeneous liquid medium, occurs in very different situations.
According to the flow configuration and the physical properties of the
liquid, cavitation is the most commonly required one in all the researches
on the pumps and flow systems but they are too hard to manipulate with
the primary methods. In this research was study the effects of rotational
speed (rpm); flow rate (Q); fluid temperature (T) and pressure (P) on
cavitation in pumps and flow system, to improve the pumps efficiency,
and to choose a suitable method circuits and software programming. This
research includes mechanism of cavitation formation, cavitation
Reduction Techniques and ANSYS FLUENT Software. It was
determined that a change in rotational speed, fluid flow rate and
temperature are caused by changes in cavitation and find out that the
cavitation in pumps increase with the rise of rotational speed and increase
with increase in fluid flow rate and increase when the fluid flow rate is
being so less and decrease with temperature rising and decrease with
increase in exit pressure.
Gouda, E (2021). A Study of Cavitation in Pumps and Flow Systems. Afribary. Retrieved from https://track.afribary.com/works/a-study-of-cavitation-in-pumps-and-flow-systems
Gouda, Eng. "A Study of Cavitation in Pumps and Flow Systems" Afribary. Afribary, 19 May. 2021, https://track.afribary.com/works/a-study-of-cavitation-in-pumps-and-flow-systems. Accessed 19 Nov. 2024.
Gouda, Eng. . "A Study of Cavitation in Pumps and Flow Systems". Afribary, Afribary, 19 May. 2021. Web. 19 Nov. 2024. < https://track.afribary.com/works/a-study-of-cavitation-in-pumps-and-flow-systems >.
Gouda, Eng. . "A Study of Cavitation in Pumps and Flow Systems" Afribary (2021). Accessed November 19, 2024. https://track.afribary.com/works/a-study-of-cavitation-in-pumps-and-flow-systems