ABSTRACT
This work is aimed at designing and fabricating a spin dryer which can be used in drying spent grains after brewing. This will no doubt save considerable human labours and time wastage involved in conventional method of drying the spent grains by spreading on the ground. It also saves as a means of employments for our teaming population. This machine was designed after due consideration of its ease of production, maintenance and servicing.
Chapter one gives account of the introductory background of the project. Chapter two was the literature review of the project. Chapter three was the synthesis of solution under which different alternatives, comparison of alternatives and choice were discussed. In chapter four, effort was made to discuss the Analysis and Theory of design. The details of construction, Maintenance, Procedures and testing and evaluation were discussed, In chapter five. After the testing, it was found to perform effectively and efficiently. Chapter six became the home for Material evaluation, machine and labour cost analysis. Finally was chapter seven, where we based our discussion on the project, possible recommendations and conclusion.
TABLE OF CONTENTS
Title page
Approval page
Release page
Signature page
Dedication
Acknowledgement
Abstract
Table of contents
CHAPTER ONE – INTRODUCTION
1.1 Identification of Needs
1.2 Purpose of Construction
1.3 Importance and Specification of the project
1.4 Scope
CHAPTER TWO – LITERATURE REVIEW
2.1 History about the project
2.2 Introduction of the project
CHAPTER THREE – SYNTHESIS OF SOLUTION
3.1 Different Alternative
3.2 Comparison of Alternatives and Choice
CHAPTER FOUR – THEORY OF DESIGN AND ANALYSIS
4.1 Theory of Design
4.2 Analysis of Design
CHAPTER FIVE – CONSTRUCTION/MAINTENANCE PROCEDURES
5.1 Material Selection
5.2 Production Processes –Workshop Operational Sequences
5.3 Machining of Components
5.4 Assembly Procedures
5.5 Testing and Evaluation
CHAPTER SIX
6.1 Material Costing Analysis
6.2 Machine Cost Analysis
6.3 Labour Cost Analysis
CHAPTER SEVEN
7.0 Discussion
7.1 Recommendation
7.2 Conclusion
Bibliography
Working Diagram.