This study analyzes a low-cost reliable real-time optimal monitoring platform for fused filament fabrication-based open source 3-D printing. An algorithm for reconstructing 3-D images from overlapping 2-D intensity measurements with relaxed camera positioning requirements is compared with a single camera solution for single side 3-D printing monitoring. The algorithms are tested for different 3-D object geometry and filament colors. The results showed that both of the algorithms with a single and double camera system were effective at detecting a clogged nozzle, incomplete project, or loss of filament for a wide range of 3-D object geometries and filament colors. The combined approach was the most effective and achieves 100 percent detection rate for failures. The combined method analyzed here has a better detection rate and a lower cost compared to previous methods. In addition, this method is generalizable to a wide range of 3-D printer geometries, which enables further deployment of desktop 3-D printing as wasted print time and filament are reduced, thereby improving the economic advantages of distributed manufacturing.
Pearce, J. (2019). Factors Effecting Real Time Optical Monitoring of Fused Filament 3-D Printing. Afribary. Retrieved from https://track.afribary.com/works/factors-effecting-real-time-optical-monitoring-of-fused-filament-3-d-printing
Pearce, Joshua "Factors Effecting Real Time Optical Monitoring of Fused Filament 3-D Printing" Afribary. Afribary, 15 Apr. 2019, https://track.afribary.com/works/factors-effecting-real-time-optical-monitoring-of-fused-filament-3-d-printing. Accessed 25 Dec. 2024.
Pearce, Joshua . "Factors Effecting Real Time Optical Monitoring of Fused Filament 3-D Printing". Afribary, Afribary, 15 Apr. 2019. Web. 25 Dec. 2024. < https://track.afribary.com/works/factors-effecting-real-time-optical-monitoring-of-fused-filament-3-d-printing >.
Pearce, Joshua . "Factors Effecting Real Time Optical Monitoring of Fused Filament 3-D Printing" Afribary (2019). Accessed December 25, 2024. https://track.afribary.com/works/factors-effecting-real-time-optical-monitoring-of-fused-filament-3-d-printing