ABSTRACT
This paper discusses the development of unique software for the design of various cam profiles for she plate cam operating a flat face follower. The method employed in this work is that of generating geometrical cam coordinates using standard cam motions, thereby avoiding the problem of undercutting resulting from graphical layout methods for similar cam and follower types. Determination of critical designs output parameters were carried out by the developed software computational algorithm. The software was validated by using if to simulate a number of standard cases. For the standard case having the follower profile Dwell QO@)-R~~ (28O@)-Dwell(30~)-Return'(36$) and performing cycloid rise and return motions, the prime circle radius for the cam profile the face width of the follower were calculated as 55.72mm and 33.76mm while the maximum and minimum follower velocities were 13.70 mm/d and -1 0.2 7 mm/rad respectively. Thee values, as well as those obtained for other standard cases simulated, were found to be in agreement with earlier works done in this area of research .
Simolowo, O & Bamiro, O (2021). PROPILE SJMULATION SOFTWARE FOR TRIGONOMETRIC AND POLYNOMIAL CAMS DESIGN. Afribary. Retrieved from https://track.afribary.com/works/propile-sjmulation-software-for-trigonometric-and-polynomial-cams-design
Simolowo, O and O Bamiro "PROPILE SJMULATION SOFTWARE FOR TRIGONOMETRIC AND POLYNOMIAL CAMS DESIGN" Afribary. Afribary, 11 Mar. 2021, https://track.afribary.com/works/propile-sjmulation-software-for-trigonometric-and-polynomial-cams-design. Accessed 24 Nov. 2024.
Simolowo, O, O Bamiro . "PROPILE SJMULATION SOFTWARE FOR TRIGONOMETRIC AND POLYNOMIAL CAMS DESIGN". Afribary, Afribary, 11 Mar. 2021. Web. 24 Nov. 2024. < https://track.afribary.com/works/propile-sjmulation-software-for-trigonometric-and-polynomial-cams-design >.
Simolowo, O and Bamiro, O . "PROPILE SJMULATION SOFTWARE FOR TRIGONOMETRIC AND POLYNOMIAL CAMS DESIGN" Afribary (2021). Accessed November 24, 2024. https://track.afribary.com/works/propile-sjmulation-software-for-trigonometric-and-polynomial-cams-design