Solid Dispersions Based on Peg 4000, Soluplus and their Hybrids for Enhanced Delivery of Glimepiride

ABSTRACT

The present study investigates the possibility of enhancing the solubility, and hence the bioavailability of poorly water soluble glimepiride via formation of polyethylene glycolpolyvinyl caprolactam - polyvinyl acetate grafted copolymer (Soluplus®) and PEG 4000 based solid dispersions by solvent evaporation technique.Different batches of glimepiride solid dispersions (SD) were prepared using solvent evaporation method with Soluplus® and PEG 4000 as polymer matrix at different ratios. The percentage yield, morphology, drug content, micromeritic properties and drug dissolution studies (in different media: SIF pH 7.4 and SGF 1.2) of the dispersions were evaluated. These formulations were characterized for solid state properties using differential scanning calorimetry (DSC) and fourier transform infrared (FTIR) studies. The formulations were further evaluated for alloxan-induced antidiabetic and stability studies.The different batches formulated showed excellent morphology, good flow properties, practical yield and drug content. Solid state characterisation indicated that glimepiride was present in its amorphous form in formulations with Soluplus® and PEG 4000 due to efficient entrapment in the polymer matrix and with no drug-polymer interaction. The dissolution rate of all the solid dispersions was found to be significantly (P < 0.05) more rapid when compared to pure drug in both media except for P2 solid dispersion when compared with the commercial sample in SIF pH 7.4. In the first 30 min, percentage (%)drug released from SDs were 65.83 %, 57.93 %, 58.47 %, 51.45 %, 80.83 %, 81.67 %, 84.02 %, 70.97 %,71.13 % and 46.80 % for batches S1, S2, P1, P2, SP1, SP2, SP3, SP4, SP5 and Amaryl®, respectivelyin SIF, pH 7.4. At the end of 120 min, batch SP3 solid dispersion showed maximum % drug released of 96.11 and 57.08 in SIF pH 7.4 and SGF pH 1.2 respectively, while batch P2 had least % drug released of 74.55 and 40.45 in SIF pH 7.4 and SGF pH 7.4 respectively. The kinetics of drug release from all the solid dispersions followed first order. Glimepiride in its pure form had very slow dissolution rate, 14 when compared with the solid dispersions. The blood glucose reduction in albino rats by the solid dispersions was significantly (p < 0.05) more and sustained when compared with the pure drug sample. The maximum percentage (%) blood glucose reduction of 9.81 % and 8.97 % was achieved in 3 hours for the two groups (A and C, respectively) treated with SDs batch SP1 and SP3. Thus, the solid dispersions prepared with Soluplus® and polyethylene glycol 4000 might be useful for delivering poorly soluble glimepiride with enhanced solubility and dissolution rate.


TABLE OF CONTENT

Title ………………..…………………………………………………………………………..i

Certification………………………………………………………………………………...…ii

Dedication.…………………………………………………………………………………....iii

Acknowledgment……………………….………………………………………………….....iv

Table of Content……………………………………………………………………………...v

List of Tables…………………………………………………………………………...……..ix

List of Figures……………………………………………………………………………....... x

Abstract…………………………………………………………………………………...…xiii

CHAPTER ONE

INTRODUCTION………………………………………………………………………....1

1.1 Background of study…………………………….……………………………….….1

1.2 Drug profile of glimepiride ………………………………………………………....2

1.2.1 Definitions …………………………………………………………………… 2

1.2.2 Chemistry of glimepiride …………………………………………………………. 2

1.2.3 Clinical pharmacology ……………………………………………………….……..3

1.2.4 Dosage and administration…………………………………………………………..4

1.2.5 Adverse reactions /side effects………………………………………………………4

1.2.6 Precaution…………………………………………………………………………....5

1.2.7 Drug interactions………………………………………………………………… 5

1.2.8 Uses……………………………………………………………………………… 5

1.3 Solid dispersion…………………………………………………………………… 6

1.3.1 Definition of term……………………………………………………………… 6

1.4 Classification of solid dispersions………………………………………………… 8

1.4.1 Solid state characteristics………………………………………………………… 8

1.4.1.1 Drug and polymer exhibiting immiscibility in fluid state……………………… 8

1.4.1.2 Drug and polymer exhibiting miscibility in fluid state…………………………… 8

1.4.2 Carriers used for formulation……………………………………………………… 15

1.4.2.1 First generation…………………………………………………………………… 15

1.4.2.2 Second generation…………………………………………………………………. 15

1.4.2.3 Third generation…………………………………………………………………… 18

1.5 Methods adopted in preparation of solid dispersions…………………………… 19

1.5.1 Fusion method…………………………………………………………………….. 19

1.5.2 Solvent evaporation technique…………………………………………………… 20

1.5.2.1 Types of solvent evaporation technique ………………………………………… 21

1.5.3 Supercritical fluid technology……………………………………………………. 22

1.5.4 Solvent melt technique…………………………………………………………… 25

1.5.5 Hot melt extrusion………………………………………………………………… 25

1.5.6 Melt agglomeration process……………………………………………………… 26

1.5.7 Effervescent method…………………………………………………………… 26

1.5.8 Adsorption of insoluble carriers………………………………………………… 27

1.5.9 Co-grinding……………………………………………………………………… 27

1.6 Characterisation of solid dispersions……………………………………………… 27

1.6.1 Physical appearance……………………………………………………………… 28

1.6.2 Percent practical yield…………………………………………………………… 28

1.6.3 Drug content…………………………………………………………………… 28

1.6.4 Aqueous solubility studies…………………………………………………… 28

1.6.5 Dissolution studies……………………………………………………………… 28

1.6.6 Fourier transform infrared (FTIR) spectroscopy………………………………… 29

1.6.7 Thermodynamic methods………………………………………………………… 29

1.6.8 Thermal analysis…………………………………………………………………… 30

1.6.8.1 Thermo-microscopic methods…………………………………………………… 30

1.6.8.2 Differential thermal analysis (DTA)……………………………………………… 30

1.6.8.3 Differential scanning calorimetry(DSC)………………………………………… 30

1.6.9 X-ray diffraction (XRD)…………………………………………………………… 31

1.6.10 Scanning electron microscopy…………………………………………………… 33

1.7 Factors influencing drug release…………………………………………………… 33

1.8 Advantages of solid dispersions…………………………………………………… 33

1.9 Advantages of solid dispersions over other strategies…………………………… 35

1.10 Limitations of solid dispersions…………………………………………………… 36

1.11 Pharmaceutical applications of solid dispersions………………………………… 37

1.12 Commercial solid dispersion products…………………………………………… 38

1.13 Recent advances and future aspects……………………………………………… 46

1.14 Statement of the research problem and justification of study………………………48

1.15 Aim of research …………………………………………………….……………….50

1.16 Objectives ofresearch………….…………………………………….……………...50

1.17 Research hypothesis……………………………………………………………….. 51

CHAPTER TWO

MATERIALS AND METHODS…………………………………….………………….. 52

2.1 Materials…………………………………………………………………………… 52

2.1.1 Chemical and reagents…………………………………………………………… 52

2.1.2 Animals……………………………………………………………………………. 52

2.2 Methods…………………………………………………………………………… 53

2.2.1 Identification of glimepiride……………………………………………………...... 53

2.2.2 Preparation of reagents……………………………………………………………. 53

2.2.2.1 Preparation of simulated body fluids………………………………………………..53

2.2.3 Calibration curve of glimepiride……………………………………………………54

2.2.4 Preparation of glimepiride solid dispersions……………………………………… 54

2.2.5 Characterisation of solid dispersions……………………………………………… 55

2.2.5.1 Differential scanning calorimetry……………………………………………… 55

2.2.5.2 Fourier transform infrared (FTIR) analysis………………………………… 55

2.2.6 Estimation of drug contents………………………………………………………...55

2.2.7 Determination of percentage yield………………………………………………….56

2.2.8 Micromeritic properties of the solid dispersion…………………………………… 56

2.2.9 In vitro drug dissolution……………………………………………………........... 57

2.2.10 Determination of invivoantidiabetic activity…………………………………… 57

2.2.11 Stability studies………………………………………………………………….. 58

2.2.12 Statistical analysis…………………………………………………………… 58

CHAPTER THREE

RESULTS AND DISCUSSION………………………………….………………… 60

3.1 Identification of pure drug sample………………………………………………… 60

3.2 Practical yield of solid dispersions………….……………………………………. 60

3.3 Morphology and physical appearance…………………………………………….. 60

3.4 Drug content…………………………………………………………………….. 68

3.5 Micromeritic properties of the solid dispersions………………………………….. 68

3.6 Invitro drug dissolution studies………………………………………………….. 72

3.7 FTIR spectroscopy …….…………………………………………………………. 79

3.8 Differential Scanning Calorimetry(DSC) ……………………………………….. 81

3.9 Invivoantidiabetic studies………………………………………………………… 98

3.10 Stability studies of the formulations…………………….………………………… 99

CHAPTER FOUR

SUMMARY AND CONCLUSIONS…………………………………………….………. 104

4.1 Summary of results………………………………………………………………… 104

4.2 Conclusions ………………………………………………………...……………....105

4.3 Recommendation……………………………………………………………………105

REFERENCES…………………………………………………………………………….106

APPENDICES…………………………………………….……………………………….119

Overall Rating

0

5 Star
(0)
4 Star
(0)
3 Star
(0)
2 Star
(0)
1 Star
(0)
APA

Consults, E. & NNEJI, A (2022). Solid Dispersions Based on Peg 4000, Soluplus and their Hybrids for Enhanced Delivery of Glimepiride. Afribary. Retrieved from https://track.afribary.com/works/solid-dispersions-based-on-peg-4000-soluplus-and-their-hybrids-for-enhanced-delivery-of-glimepiride-3

MLA 8th

Consults, Education, and ACHUAM NNEJI "Solid Dispersions Based on Peg 4000, Soluplus and their Hybrids for Enhanced Delivery of Glimepiride" Afribary. Afribary, 22 Dec. 2022, https://track.afribary.com/works/solid-dispersions-based-on-peg-4000-soluplus-and-their-hybrids-for-enhanced-delivery-of-glimepiride-3. Accessed 24 Dec. 2024.

MLA7

Consults, Education, and ACHUAM NNEJI . "Solid Dispersions Based on Peg 4000, Soluplus and their Hybrids for Enhanced Delivery of Glimepiride". Afribary, Afribary, 22 Dec. 2022. Web. 24 Dec. 2024. < https://track.afribary.com/works/solid-dispersions-based-on-peg-4000-soluplus-and-their-hybrids-for-enhanced-delivery-of-glimepiride-3 >.

Chicago

Consults, Education and NNEJI, ACHUAM . "Solid Dispersions Based on Peg 4000, Soluplus and their Hybrids for Enhanced Delivery of Glimepiride" Afribary (2022). Accessed December 24, 2024. https://track.afribary.com/works/solid-dispersions-based-on-peg-4000-soluplus-and-their-hybrids-for-enhanced-delivery-of-glimepiride-3