ABSTRACTThe purpose of this work was to study the effect of chemical surface properties of activated carbons for their use in water purification. To achieve this objective, activated carbon in both granular and powdered forms namely: as received and devolatilized carbons were prepared. Proximate analysis of the carbon materials was performed. Mass titration experiments were carried out to determine the point of zero charge of the activated carbon materials. Again, using an ultraviolet spectro...
ABSTRACTA comparative investigation was undertaken to determine the head loss coefficients for horizontally mounted and vertically mounted orifices using a Fluid mechanics and Heat transfer trainer developed in Nigeria. Experiments were carried out observing the procedure and the discharge of the flow of water was collected to obtain the volumetric flow rate and also read off the right and left limb of the horizontal and vertical manometers at different set points. The experimental measuremen...
ABSTRACT Perfume extraction refers to the extraction of aromatic compounds from raw materials, using methods such as distillation, solvent extraction, expression or enfleurage. The extracts are either essential oils, absolutes, concretes, or butters, depending on the amount of waxes in the extracted product. Heat, chemical solvents, or exposure to oxygen in the extraction process denature the aromatic compounds, either changing their odour, character or rendering them odourless. In this work ...
ABSTRACTThe word perfume derives from the latin ―per fumum‖ meaning through smoke, is fragrant liquid that is sprayed or rubbed on the skin or clothes to give a pleasant smell. Extraction of perfume from various plants resources is of ancient origin. Infact the natives from different tropical regions of the globe have long been extracting oil from numerous oil bearing plants. Human since the ancient time have known how to extract oil from their natural resources. Vegetable oils are natura...
ABSTRACTThis project was done to extract and characterize bean oil according to their particle sizes. The experiment was carried out using scent bean (i.e. ‘Ozaki’, ‘Ijilizi’or ‘Azamu’) as sample. The oils were extracted by solvent extraction /leaching extraction using n-hexane. Proximate analysis was carried out to obtain percentage moisture content, ash content, total oil content, protein content and carbohydrate content of the extracted oils. From observation, it was noticed th...
ABSTRACTThis study is a comparative analysis of the use of coal, fuel oil and natural gas for cement production noting their physical and chemical properties, cost and availability, impact on the environment and human health. Out of the seven cement manufacturing industries in Nigeria, three industries use these fuels were selected for the study. The industries are NigerCem –Ebonyi state, Dangote cement –Benue state and UniCem -Cross river state. Questionnaires were used to gather informa...
ABSTRACTActivated carbon, also widely known as activated charcoal or activated coal is a form of carbon which has been processed to make it extremely porous and thus to have a very large surface area available for adsorption or chemical reactions (Mattson et al., 1971). The word active is sometimes used in place of activated. It is characterized by high degree of micro porosity. A gram of activated carbon can have a surface area in excess of 500 m2. Sufficient activation for useful applicatio...
ABSTRACTBiomass, particularly agricultural residues seem to be one of the most promising energy resources for developing countries (Patomsok, 2008). Rural households and minority of urban dwellers depend solely on fuel woods (charcoal, firewood and sawdust) as their primary sources of energy for the past decades (Onuegbu, 2010). Of all the available energy resources in Nigeria, coal and coal derivatives such as smokeless coal briquettes, bio-coal briquettes, and biomass briquettes have been s...
ABSTRACTThe project “microcontroller based intelligent traffic light system with automatic street light and warning light” was designed to tackle the traffic issues in the country so as to establish automatic traffic control and monitoring system with near perfection. The project intelligent traffic light with automatic street light and warning light is a complex microcontroller based project that was designed to control traffic on a four way road network.The system is embedded with sens...
ABSTRACT A comparative study was conducted among organic waste materials namely coconut fiber, hair, sawdust and woodchips as crude oil absorbents. Twenty grams of each of these materials were wrapped in a pouch and submerged into two set-ups, Set-up A: Pure Crude Oil and Set-up B: Crude Oil with seawater, for an hour. Amount of oil absorbed was gathered and recorded. ANOVA was conducted to verify if the results significantly differed. The results show that hair had the highest amount of ab...
ABSTRACT In recent times, most of the household appliances are using electric power and as such, electricity shortage has become a major problem throughout the world. Ceiling fan is one of such appliances that consume electric power. The best way to minimize the power consumption of the ceiling fan is to reduce the weight of the ceiling fan blade. Thus, this project work entails the design of a new ceiling fan blade in which case the weight and power consumption was compared to the Panasonic ...
ABSTRACT The research project studies the analysis of pear and its oil. The mesocarp from edible African pear “DacryodesEdulis” were evaluated for their oil yield. The pulp from this pear were oven dried at 100oC-105oC to a moisture content level of 29%.The mesocarp was subjected to proximate analysis to determine the percentage of the moisture, ash, fat, crude fibre, crude protein and carbohydrate content which resulted to the values of 29%, 2%, 19.6%, 25.5%, 11.9%, and 12% respectively....
ABSTRACTThe general approach to any design of a process plant involve an advanced network of Chemical Engineering processes. This equipment design project was carried out to design a molten salt cooler (heat exchanger) for production of 2.7 x 104 tonnes/year capacity of phthalic anhydride by direct synthesis of gaseous naphthalene.The information concerning the design of this equipment was gotten from literature review which was then used to obtain the physical properties datas. The mater...
INTRODUCTION A public address system is an electronics sound amplification and distribution system with a microphone, amplifier and loud speaker used to allow a person to address a large public. The public address system consists of three main parts namely, the microphone (input transducer), amplifier and the loudspeaker (output transducer). The microphone picks up the sound and convert it to electronic signal in milivolts and this is fed to the amplifier for amplification. In this project, a...
ABSTRACT As the name of the project implies “Automatic Emergency Light” is an electronic system that can provide light during emergency situations i.e when mains (NEPA) supply fails. This system can provide enough light with full brightness in a given room or office. The system makes use of white light emitting diodes for the lightings. It is automatic in operation, in the sense that it can switch itself off when the battery charges full. Automatic Emergency light comprises three s...