Engineering

Engineering Research Papers/Topics

PRODUCTION OF EMULSION POINT WITH THE AVAILABLE MATERIAL

ABSTRACT This project is on the production of paint from the available materials.  The first process involved was the sourcing of the available material which include calcium carbonate (dotonute) water etc.  the next step is the proper production procedure.  The  same product patterns was employed while the production was valued with a view to obtain a high quality paint.From the result obtained, it was observed that high quality paint was produced in production category C(3), consisting ...

PRODUCTION OF LOQUID AND VAPOURIZED PERFUME

ABSTRACT This research project was carried out principally for the production of liquid and vapourized perfumes from local raw materials.  The local raw material were subjected to various processing conditions in order to obtain purified perfume.  The methods generally used in this work include expression steam distillation and solvent extraction. During the production of vapourized and liquid perfume the modern solvent for blending and holding perfume materials is highly refined ethanol m...

ALTERNATIVE RAW MATERIAL SOURES FOR CEMENT PRODUCTION

ABSTRACT It is generally known that cement id produced from limestone, mar/clay and gypsum by the following three basic process- wet semi- wet aid dry process. The cost of exploiting the limestone: the major raw material constitute about 50% of the production cost which results in the high cost of cement.  It therefore becomes imperative to bring down the cost of cement by investigating into alternative source of raw material for cement production and hence this project. From literature, r...

THE DESIGN AND COSNTRUCTION OF 1000KWA STABILIZER A PROJECT PRESENTED TO THE DEPARTMENT OF ELECTRICAL/ELECTRONICS ENGINEERING

ABSTRACT Despite all attempt of the federal government to have not only an uninterrupted power supply for all cities in Nigeria, but a voltage that is inconformity with the recommended 220/230v for domestic consumption for example.  The NEPA Plc is facing some difficulties in generating, transmitting and distributing the required voltage stabilizer, which could be connected, to the main and then the load is in turn connected to it.This automatic, AC voltage stabilizer has two major sections....

THE DESIGN AND IMPLEMENTATION OF ELECTRONICS SEQUENTIAL SIGN PATTER DISPLAY

ABSTRACT This design implementation of this electronic sequential sign post display employs the use of some specialized components. This section of the project introduces the reader to the different section of the project and the components that makes them up.Emphasis are laid on describing the behaviour and operational system of the components as related to the project modeling, analysis, design and implementation of an ELECTRONIC SIGN POST, which is made up of a power supply, a shift regist...

CONSTRUCTION OF AN INTRUDER ALARM SYSTEM

ABSTRACT The intruder alarm system was designed and build in order to let the industrial and commercial company know how important alarm system is all about. These can be of Good help if the intruder will look through this project and support for the development of this project as to let the Federal Government know that the young engineering of today can produce (construct) things that will help the economic and growth in developing this country is technology  The intruder alarm system uses ...

PRODUCTION OF CASSAVA OF STARCH FROM CASSAVA

ABSTRACT The fresh cassava were sources from Idodo in Nkanu Local Government of Enugu state. The weight of the cassava tuber were taken to be 31.50kg. After peeling and washing, it was divided into two equal parts which was 21.13kg for production of sample A and sample B respectively (edible and textile starch) which weighed 13.1kg. During this process, the temperature were obtained at 700c (617.4R). And the other properties of the cassava samples were carried out, such as moisture content o...

BURGLAR ALARM UNIT

INTRODUCTION As the world is developing the need for electronics in human endeavor is now taking a larger scope. With the invention of certain electronics gadgets in our societies today, certain activities become easily handled for example; in communication where the telephone plays a part.  In places where safety are needed an alarm system will be of much important.The application of electronics in this modern age is simply inexhaustible and this group form more interest in the alarm system...

FORMULATION OF ARTIST PAINT

ABSTRACT  This study was carried out principally for the formulation of artist paint using available raw materials. Paint simplified is a material which may be applied to surfaces in relatively thin layers and which changes to a solid and may occur by evaporation of solvents, by chemical reaction or by combination of the two. Artist paint is the paint used by artists to do their paintings. These paints comprises of the water color paint, poster color paint, oil paint, acrylic paint and so on...

DESIGN AND CONSTRUCTION OF AN AUTOMATIC VOLTAGE STABILIZER

ABSTRACT In the world today, the use of power supply in electronics equipment and gadgets has increased and it is still increasing.  These power supplies are not stable as required by these electronics. This arise the need for the power stabilization as to overcome this problem  This project handles this problem very well.  Some recommendations were also made on this topic and student and users of electronics equipment will find them useful. TABLE OF CONTENTS Cover Page Title Page Approva...

DESIGN AND CONSTRUCTION OF VOLTAGE INVERTER SYSTEM WITH TRICKLE CHARGING SYSTEM

ABSTRACT This project is he design and construction of a voltage inverter system with trickle charging system. This device is design to provide power supply for the need of offices, household etc. In absence of NEPA power supply. It would also prevent harm to our appliances caused by power holding company LTD (NEPA) Random power outage . TABLE OF CONTENT Title Page Approval Page Dedication Acknowledgment Abstract Table of Contents CHAPTER ONE Introduction Most Essential Circuit in the Devic...

REFINING OF VEGETABLE OIL WITH ENUGU COAL

ABSTRACT This project was carried out using acid activated coal from Enugu coal and the production of ve4getablew oil was monitored using spectrophotometer to measure the absorbance. It was also perform to check the suitability of activated Enugu coal as a bleaching agent for palm oil. The Enugu coal samples were collected, size reduced, carbonized and activated with acid (phosphoric Acid) before being used for the bleaching process. The bleaching process lasted for 40minutes and it was absor...

CONSTRUCTION OF A STELL CUPBOARD

ABSTRACT The aim of this project was to construct a steel cupboard in order to help us acquire the knowledge of fabrication of a modern cupboard and the essence of it. Also to enable us (the students of chemical Engineering) to know how to construct as future engineers. The construction of steel cupboard was done using a square pipe of 1.5mm thickness and the mild steel having a thickness of 1.5mm. it was mark out cut, welded, filled and painted. The  cupboard has length and height of 1150mm...

REPAIR AND REHABILITATION OF A FAULTY DEEP FREEZER IN THE MECHANICAL ENGINEERING DEPARTMENT

ABSTRACT  Mechanical Engineering Department of the named Institute has many non – operational malhiues. Sequel to the fact, maintenance was poorly excuted which resulted to the breakdown deep freezer. Quality and effectiveness of machine maintenance were well observed. Also, a minimized maintenance and a highly successful  repair was adopted. In other words during the repair and rehabilitation of the facility Deep Freezer, appropriate tools, cost and  quality of materials were well consi...

THE CONSTRUCTION OF SIEVE EQUIPMENT

ABSTRACT The sets of seizes with shocker which was fabricated and assembled in the chemical engineering pilot plant was aimed at providing the students with a machine that will aid them in practical involving the separation of solid particles. Besides this, it was also fabricated sizes or diameter of the solid particles of a substance by allowing it pass through the pores or aperture of the sieve plates. The process of operation involved the following: marking out of the sieve plate using di...


3271 - 3285 Of 3407 Results