REMODELLING OF CONFERENCE ROOM FLOOR FINISHES, WINDOW AND FURNITURES

ABSTRACT

This project is anchored on the design and construction of Tiles, windows and furniture involves in the conference room their method and pattern of construction, it’s advantages value and as well other valuable tool such as; working tools for the construction o tiles; (cement, white cement, fine aggregate e.t.c); tools for the construction of windows; (nails and screws, drills e.t.c) and also tools for the construction of furniture

Furthermore, the purpose of tiles, it values, it significance from other floor beauty materials, and also the types of tiles and the purposes of other types as differ. 

In addition too, this project covers the construction of different types of windows, even for the differential purpose, the value of different window structures as pertaining to it cost and the shapes as ficatured in the pictures .   

TABLE OF CONTENT

Title Page i

Certification ii

Dedication iii

Acknowledgement iv

Abstract v

Table of content vi

CHAPTER ONE 

1.0 Introduction 1

1.1 Aims and Objectives 2

1.2 Scopes of Study 3

CHAPTER TWO 

2.0 Literature Review 4-

2.1 Ceramics, Tiles, And Manufacturing process. 6

2.2 Methods of Manufacturing Ceramic tiles 8-9

2.3 Type Glazed Ceramic tiles 9

2.3.1 Glazed Ceramic tiles 10

2.3.2 Unglazed ceramic tiles 10

2.4 Ceramic floor tile manufactures 10

2.5 Packing grading and sorting of ceramic floor tiles 11

2.6 Pattern formation with tiles 12

2.7 Methods of tiles placement 12 

2.8 Precaution that are necessary during tile placement 15

2.9 Materials used for  tiling 16 

2.10 Tools necessary for ceramic floor tile. 17

2.11 Construction method 18

CHAPTER THREE 

3.0 Introduction to Aluminium Window 21

3.1 Important of window 21

3.2 Different types of material used for window 21

3.3 Glass, Aluminium and Burglary Metal Frame glass 23

3.3.1 Aluminium 24

3.3.2 Metals 26

3.4 Scope of project 27

3.5 Aim and objective 27 

3.6 Material used 28

3.7 Properties of Metal 29

3.8 Properties of Aluminium 30  

3.9 Properties of Glass 30

3.10 Properties of Rubber 31

3.11  Design and construction of Aluminium window and burglary Frame for office use. 31

3.12 Finishing 32

3.13 Joint and connection 33

3.14 Safety Precaution 34

CHAPTER FOUR 

4.0 Material used for the Furniture 36 

4.1 Tools and equipment 37

4.2 Finishing 40

CHAPTER FIVE 

5.0 Conclusion 43

5.1 Recommendation 44

Reference