ABSTRACT The main objective of this study is to investigate the corrosion resistance characteristics of electroplated Medium Carbon Steel (MCS) in 0.5mol/dm3 Sodium Carbonate environment. Nickel plating of MCS was done in watts solution for 25 minutes with a current density of 3 A/dm3 at 60oC. The nickel plated MCS was later gold plated for 20 minutes with a current density of 0.2 A/dm3 at 50oC . The plated and unplated MCS were exposed to sodium carbonate environment for 360 hours. The weigh...
Abstract The prevailing wind speed and direction in an environment are critical factors in farmstead planning as they influence the appropriate location and orientation of structures in order to reduce wind load impact and promote a healthy environment. The failure of farm structures especially with roof blown-off arising from wind load has become rampant in Ibadan environ in recent time and an urgent solution is desirable. In this work, an attempt is made to develop a wind rosette for Ibadan...
abstract Energy requirements and exergy inefficiencies for processing of malt drink were estimated for a Nigerian brewery. The process was divided into twenty-one basic unit operations and grouped into four main group operations: silo house, brew house, filter room and packaging house. The energy intensity for processing a batch of 9.8 tonnes brew grains to 562 hl of malt drink was estimated as 261.63 MJ/hl consisting of electrical (41.01%), thermal (58.81%) and manual (0.19%) of the total en...
Abstract This study investigated the corrosion resistance of plated and unplated steels useful as ornamentals in saline environment. Nickel plating of carbon steel was done in watts solution for 25minutes with a current density of 3 Adm-3 at 60o C. The nickel plated carbon steel was later gold plated for 20 minutes with a current density of 0.2 Adm-3 at 50o C . The plated and unplated carbon steels were immersed in saline environment for 360 hours. Weight loss was taken every 24 hours in orde...
INTRODUCTION Measurement of mechanical. thermal, electrical, and chemical quantities are made by devices called sensors and transducers. The sensor is responsive to changes in the quantity to be measured e..g. temperature, position, systolic bold pressure or chemical t concentration. The transducer converts such measurement into electrical signals. which usually simplified can be fed into instruments for the readout, recording or control of the measured quantities. Sensors and transducers can...
Abstract This work presents the artificial neural network(ANN) modeling for sacrificial anode cathodic protection of low carbon steel using Al-Zn-Sn alloys anodes in saline media. Corrosion experiments were used to obtain data for developing a neural network model. The Feed forward Levenberg-Marquadt training algorithm with passive time, pH, conductivity,% metallic composition used in the input layer and the corrosion potential measured against a silver/silver chloride(Ag/AgCl) reference elec...
INTRODUCTION Interfacial tension between two immiscible fluids arises from the dissimilarity of the intermolecular forces between the molecules in the phases. According to Shen et al [1] Interfacial tension affects two-phase flow and displacement processes in porous media. Interfacial films could also contain ionizable groups such as asphaltenes, resins, organic acids and solids which affect the physical properties of emulsions and the solubility of some polar organic compounds at the oil-wa...
Abstract—In recent years, chaotic secure communication systems have attracted significant interest due to their higher unpredictability over conventional secure communications systems and simplicity of implementation. This study presents the modeling of four chaotic modulation techniques. The techniques are Chaotic Masking (CM), Chaos Shift Keying (CSK), Chaos On-Off Keying (COOK), and Differential Chaos Shift Keying (DCSK). Simulations were carried out using Simulink in Matlab environment ...
ABSTRACT In this paper a forward difference operator method was used to solve a set of difference equations. We also find the particular solution of the nonhomogeneous difference equations with constant coefficients. In this case, a new operator call the forward difference operator ∆r,s, defined as ∆r,s yn = r yn+1 - s yn, was introduced. Some of the properties of this new operator were also investigated.
ABSTRACT Some welded structures show poor mechanical properties at the weld and the adjacent zones. This has led to the collapse of structures when subjected to various torques. This research investigates the grain structure of the fusion zone of a single pass arc welding of structural steel to identify the mode of growth and grain transition of the zone and adjacent weld. Two parameters – temperature gradient in the direction of solidification and rate of advance of solidification were stu...
ABSTRACT All over the world, there is an increasing enrolment level for university admissions in view of the ever-increasing benefits of eaming university degrees. Thus, the high population of students in many universities, coupled with a high number of vehicles has made traffic control a challenge to University traffic managers. In this paper, the method of Resca1e Range Analysis (RRA) was used to estimate the Hurst Exponent Value (HEV) for the traffic inflow through the main entrance gate o...
Abstract: The maintenance profitability problem is an important but emerging . concept of maintenance performance measurement that views the maintenance function as a value adding subsection of the organisation. The service provided by the maintenance system to production is charged as a price, which results in the monetary contribution of the maintenance department to the organisation. In the same way. as production would add financial benefits to the organisation the maintenance system is p...
Abstract: Micro-alloyed steels produced by controlled rolling are of the most attractive propositions in many engineering applications because of their relative low cost, moderate strength and very good toughness when compared with as-castalloy steel.. This research work has shownthe possible substitution of cheaper, low-alloy steel for the high alloy steel for the same application. The effect of HTMT onthe mechanical properties of low alloy steel was investigated.
Abstract: Fruit trees am hardly ever sought for their wood until recently. Fruit trees like C. alhidum is now being used for structural and non structural purposes in city suburbs, This study investigated wood properties and few tree chplracteristies of C. albidum grown in AkinyeIe Local Government h (ALGA), Ibadaa, Oyo State, Nirk The dm was to mitigate, the dearth of information on these &atut.cs in elation to its utitdon. Samples %re collected from five emerging settl&ents in the; study ar...
ABSTRACT The research work provides the basic information for the desrgn of a Central Air-Conditioning system for Kenneth Dike Library extension, U.niversity of Ibadan, Oyo Stake used as a case study. The software was designed, using a visual basic 6.0 (C++) programming language, to perform a thermal analysis for all the rooms of the floors in the building. The developed software called AIRCCAD is implemented to handb mathematical equations and engineering calculations efficiently and effecti...