ABSTRACT Runge-Kutta scheme is one of the versatile numerical tools for the simulation of engineering systems. Despite its wide and acceptable engineering use, there is dearth of relevant literature bordering on visual impression possibility among different schemes coefficients which is the strong motivation for the present investigation of the third and fourth order schemes. The present study capitalise on results of tedious computation involving Taylor series expansion equivalent supplement...
Abstract- This study investigated the parameters space of simple and familiar quadratic equation often encounter in science based disciplines and in particular engineering. The aim is strange images creation to excite and launch novices to quest for general understanding of fractal taking parallel clue from Julia and Mandelbrot sets creation using the iterative mechanism of complex quadratic mapping. Preliminary computation of a Julia and Mandelbrot sets was performed on a square complex plan...
ABSTRACT Tomato (Lycoperscium spp.) is an important component of daily dietary intake with seasonal and geographical variation in its production. They are usually in short supply in the dry season and effective storage in the fresh state still poses a challenge. Pre-treatment methods have been reported to improve drying characteristics of fruits and vegetables but there is dearth of information on drying of indigenous variety of tomato despite its high nutritional value. Pre-treatment methods...
ABSTRACT Soil displacement by tillage is a major contributor to the redistribution of soil particles within the soil profile. The extent of soil redistribution eventually has an effect on the performance of crop production. It is, therefore, valuable to investigate soil displacement by disc plough since it is known to be the widely used primary tillage implement in Ghana. Consequently, a study was conducted at the Livestock and Poultry Research Centre of the University of Ghana (LIPREC) with ...
Abstract This research work investigated the modeling of Von Mises stress in LNG Spherical Carbon Steel Storage tank using assumed displacement Finite Element analysis based on shallow shell triangular elements. Using equations of elasticity, constant thickness carbon steel spherical storage tanks were subjected to different loading conditions. This paper stresses the need for proper definition of shallow element using sector angles to obtain the shallowness. The shallow spherical triangular ...
ABSTRACT Two field experiments were conducted to compare the growth and yield of tomatoes using experimentation and FAO AquaCrop model at the University of Cape Coast Teaching and Research Farm in the Cape Coast Metropolitan Assembly of the Central Region of Ghana. The Randomized Complete Block Design was used with four (4) treatments and four(4) replications for the two experiments. The treatments used for both experiments were T1 – Full irrigation (100 %), T2 – 90 % irrigation, T3 –...
Abstract This research work investigated the corrosion resistance of nickel plated low carbon steel in tomato fluid. It simulated the effect of continuous use of the material in a tomato environment where corrosion products are left in place. Low carbon steel samples were nickel electroplated at 4V for 20, 25, 30 and 35 mins using Watts solution.The plated samples were then subjected to tomato fluid environment for for 30 days. The electrode potentials mV (SCE) were measured every day. Weight...
ABSTRACT The main objective of this study is to investigate the corrosion resistance characteristics of electroplated Medium Carbon Steel (MCS) in 0.5mol/dm3 Sodium Carbonate environment. Nickel plating of MCS was done in watts solution for 25 minutes with a current density of 3 A/dm3 at 60oC. The nickel plated MCS was later gold plated for 20 minutes with a current density of 0.2 A/dm3 at 50oC . The plated and unplated MCS were exposed to sodium carbonate environment for 360 hours. The weigh...
Abstract The prevailing wind speed and direction in an environment are critical factors in farmstead planning as they influence the appropriate location and orientation of structures in order to reduce wind load impact and promote a healthy environment. The failure of farm structures especially with roof blown-off arising from wind load has become rampant in Ibadan environ in recent time and an urgent solution is desirable. In this work, an attempt is made to develop a wind rosette for Ibadan...
abstract Energy requirements and exergy inefficiencies for processing of malt drink were estimated for a Nigerian brewery. The process was divided into twenty-one basic unit operations and grouped into four main group operations: silo house, brew house, filter room and packaging house. The energy intensity for processing a batch of 9.8 tonnes brew grains to 562 hl of malt drink was estimated as 261.63 MJ/hl consisting of electrical (41.01%), thermal (58.81%) and manual (0.19%) of the total en...
Abstract This study investigated the corrosion resistance of plated and unplated steels useful as ornamentals in saline environment. Nickel plating of carbon steel was done in watts solution for 25minutes with a current density of 3 Adm-3 at 60o C. The nickel plated carbon steel was later gold plated for 20 minutes with a current density of 0.2 Adm-3 at 50o C . The plated and unplated carbon steels were immersed in saline environment for 360 hours. Weight loss was taken every 24 hours in orde...
INTRODUCTION Measurement of mechanical. thermal, electrical, and chemical quantities are made by devices called sensors and transducers. The sensor is responsive to changes in the quantity to be measured e..g. temperature, position, systolic bold pressure or chemical t concentration. The transducer converts such measurement into electrical signals. which usually simplified can be fed into instruments for the readout, recording or control of the measured quantities. Sensors and transducers can...
Abstract This work presents the artificial neural network(ANN) modeling for sacrificial anode cathodic protection of low carbon steel using Al-Zn-Sn alloys anodes in saline media. Corrosion experiments were used to obtain data for developing a neural network model. The Feed forward Levenberg-Marquadt training algorithm with passive time, pH, conductivity,% metallic composition used in the input layer and the corrosion potential measured against a silver/silver chloride(Ag/AgCl) reference elec...
INTRODUCTION Interfacial tension between two immiscible fluids arises from the dissimilarity of the intermolecular forces between the molecules in the phases. According to Shen et al [1] Interfacial tension affects two-phase flow and displacement processes in porous media. Interfacial films could also contain ionizable groups such as asphaltenes, resins, organic acids and solids which affect the physical properties of emulsions and the solubility of some polar organic compounds at the oil-wa...
Abstract—In recent years, chaotic secure communication systems have attracted significant interest due to their higher unpredictability over conventional secure communications systems and simplicity of implementation. This study presents the modeling of four chaotic modulation techniques. The techniques are Chaotic Masking (CM), Chaos Shift Keying (CSK), Chaos On-Off Keying (COOK), and Differential Chaos Shift Keying (DCSK). Simulations were carried out using Simulink in Matlab environment ...