RESUMEN La eficiencia cuántica de materiales fotovoltaicos depende de la longitud de onda de la radiación incidente, el espectro solar influye en la producción de energía producida por estos sistemas. En el presente trabajo, se diseñó y construyó un prototipo funcional de un sistema de medición de radiación solar (global y difusa) basado en un espectrómetro de amplio espectro para el monitoreo solar en Cochabamba, Bolivia, conjuntamente con un sistema similar instalado en Kingston, Ontario.
Historically, the design of hybrid solar photovoltaic thermal (PVT) systems has focused on cooling crystalline silicon (c-Si)-based photovoltaic (PV) devices to avoid temperature-related losses. This approach neglects the associated performance losses in the thermal system and leads to a decrease in the overall exergy of the system. Consequently, this paper explores the use of hydrogenated amorphous silicon (a-Si:H) as an absorber material for PVT in an effort to maintain higher and more favo...
The accurate prediction of yields from photovoltaic systems (PV) is critical for their proper operation and financing, and in northern latitudes the effects of snowfall on yield can become significant. This work provides methods for identifying snowfall effects from commonly collected performance data, and recommends a model to allow for prediction of these effects based solely on meteorological time series. The model was validated with data from two large-scale (>8MW) operational PV plants. ...
Amorphous silicon (a-Si:H)-based solar cells have the lowest ecological impact of photovoltaic (PV) materials. In order to continue to improve the environmental performance of PV manufacturing using proposed industrial symbiosis techniques, this paper performs a life cycle analysis (LCA) on both conventional 1-GW scaled a-Si:H-based single junction and a-Si:H/microcrystalline-Si:H tandem cell solar PV manufacturing plants and such plants coupled to silane recycling plants. Both the energy con...
The world requires inexpensive, reliable, and sustainable energy sources. Solar photovoltaic (PV) technology, which converts sunlight directly into electricity, is an enormously promising solution to our energy challenges. This promise increases as the efficiencies are improved. One straightforward method of increasing PV device efficiency is to utilize multi-junction cells, each of which is responsible for absorbing a different range of wavelengths in the solar spectrum. Indium gallium nitri...
Although additive layer manufacturing is well established for rapid prototyping the low throughput and historic costs have prevented mass-scale adoption. The recent development of the RepRap, an open source self-replicating rapid prototyper, has made low-cost 3-D printers readily available to the public at reasonable prices (
In this paper the theory of mismatch factor of the terrestrial solar spectrum is extended to more accurately represent the irradiance available to specific types of photovoltaic (PV) materials from surface albedo. Using spectra derived from the SBDART radiative transfer model, the effects of a spectrally responsive albedo are illustrated by the differences between the spectrally weighted albedo of hydrogenated amorphous silicon (a-Si:H) and crystalline silicon (c-Si)-based PV technology compa...
Despite being an extremely active area for patent applications, nanotechnology development is being impaired by current intellectual property law. In contrast to other emerging fields at their times, nanotechnology was born as the Bayh–Dole Act enabled universities to lock down fundamental research effectively preventing open competition. Both technical complexity and bureaucratic mishandling of nanotechnology patent applications have created a dense patent thicket of overlapping claims and...
The growth of desktop 3-D printers is driving an interest in recycled 3-D printer filament to reduce costs of distributed production. Life cycle analysis studies were performed on the recycling of high density polyethylene into filament suitable for additive layer manufacturing with 3-D printers. The conventional centralized recycling system for high population density and low population density rural locations was compared to the proposed in home, distributed recycling system. This system wo...
The recent development of the RepRap, an open-source self-replicating rapid prototyper, has made 3-D polymer-based printers readily available to the public at low costs (
Previous work has shown that high-temperature short-term spike thermal annealing of hydrogenated amorphous silicon (a-Si:H) photovoltaic thermal (PVT) systems results in higher electrical energy output. The relationship between temperature and performance of a-Si:H PVT is not simple as high temperatures during thermal annealing improves the immediate electrical performance following an anneal, but during the anneal it creates a marked drop in electrical performance. In addition, the power gen...
Band gap engineering provides an opportunity to not only provide higher overall conversion efficiencies of the reference AM1.5 spectra but also customize PV device design for specific geographic locations and microenvironments based on atmospheric conditions characteristic to that particular location. Indium gallium nitride and other PV materials offer the opportunity for limited bandgap engineering to match spectra. The effects of atmospheric conditions such as aerosols, cloud cover, water v...
An unintended consequence of using “research expenditures” as a figure of merit for universities is to reduce the research output per dollar invested by discouraging the diffusion of superior, lower-cost, open-source scientific equipment.
e inconsistencies associated with the common simple method of evaluating the quality and stability of hydrogenated amorphous silicon (a-Si:H) materials for solar cell applications from just the magnitude of subgap absorption (a(E)) are addressed in this study. The approach taken in this study is to characterize the entire a(E) spectrum by its derivatives, d[a(E)]/dE. Results are presented and discussed for two a-Si:H thin film materials differing in deposition rate by an order of magnitude, w...
Se diseñó y construyó un prototipo funcional de un sistema de medición de radiación solar (global y difusa) basado en un espectrómetro de amplio espectro (UVA, VIS y parte del IR cercano) para el monitoreo solar en Cochabamba, Bolivia, conjuntamente con un sistema similar instalado en Ontario, Canadá. Los datos obtenidos en dos regiones con características geográficas muy distintas ayudaran en el estudio y optimización de materiales fotovoltaicos, para su implementación en diferent...